Dufour Arpege 30
Project
- Bateau REF# · 214026
- Longeur hors tout · 9.27m
- Année ·
- Construction · Fibre de Verre
- Coque · Quillard
- Couchettes · 6
- Moteur · 1 x gasoil 0cv, Volvo Penta MD2 ()
- Visible à · Lancashire
Ce bateau est vendu Voici d’autres bateaux à vendre
Détails supplémentaires
Architecte | Michel Dufour |
---|---|
Chantier | Dufour (FRA) |
Visible à | Lancashire |
Capacité carburant | 27.0 L Total - 1 Cuve(s) |
Capacité d'eau | 100.0 L Total - 1 Cuve(s) |
Mécanique
Moteur | 1 x gasoil 0cv |
---|---|
Marque et le modèle du moteur | Volvo Penta MD2 () |
Heures moteur | Inconnu |
Barre | barre franche |
Transmission | arbre d'hélice |
Consommation carburant (approx) | Inconnu |
Dimensions
Longeur hors tout | 9.27m |
---|---|
Longeur flottaison | 6.71m |
Bau | 2.78m |
Tirant d'eau Min | 1.62m |
Tirant d'eau Max | 1.62m |
Deplacement | 2,994kg |
Hauteur sous barrots | 1.83m |
Stationnement | Marina |
Voiles
Grand voile à ris | - bande à ris () Stack Pack, Fully Battened, |
---|---|
Génois/foc | - Enrouleur () |
Systèmes électriques
3 batterie(s) chargé(s) par: moteur, prise de quai
Construction
Construction | Fibre de Verre |
---|---|
Coque | Quillard |
Finition | Gelcoat finition |
Aménagements
Nombre total de couchages | 6 |
---|---|
Nombre de lits doubles | 1 |
Nombre de lits simples | 4 |
Cabines | 1 |
Lavabo | 1 |
Toilettes | 1 Toilettes (WC marine) |
New Jabsco Toilet
2 feux(s) gaz cuisinière
Aménagements
Cuisinière | |
---|---|
Grill | |
Four | |
Evier | |
Rideaux | |
Système d'eau sous pression |
New Jabsco Toilet
2 feux(s) gaz cuisinière
Accastillage de pont
2 winch(s) de drisse
2 winch(s) d'écoute
guindeau
1 ancre(s)
annexe ()
(Gonflable)
4CV hors-bord, Mercury ()
Equipement de Navigation
Compas | |
---|---|
Vitesse | |
Log | |
Vent | |
Radio VHF DSC | |
Traceur | |
Pilote automatique | |
Navtex | |
Horloge | |
Baromètre | |
Feux de navigation |
Equipement de Sécurité
Perche IOR | |
---|---|
Corne | |
Echelle d'embarquement |
1 pompes de cale (0 manuel / 1 électrique)
Commentaires du Broker
There has been a report done by Chris Dobson Marine on this boat and it needs the injectors stripping down and rebuilding and ideaaly a full re-wire though you could get away with a partial re-wire. There is a quotation for the work of £1,750 if you wanted the work done by an engineer. We would still recommend a hull survey as the hull has not been inspected recently.
These vessels were designed for cruising with performance.
'Well balanced, quick and easily handled' was the Yachting Monthly verdict when they trialled the Arpege in April 2005.
This vessel would benefit from a general clean up and some TLC but has all the appeal for anyone looking for a fast cruiser with well thought out sea going accommodation.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.